Dualit Spare Parts

This is the 1 cup filter basket for the Cafe Minuetto and Dualit 84460 espresso/Espressione CE4492. This will hold 7 g of espresso coffee.

Now, you can use Nespresso capsules with your Dualit 84460 espresso machine. Simply place the capsule in the piercer, and it will create 3 holes, allowing the water to pass through when used with the Dualit 84460.

Dualit NX Filter Holder for capsules. Transform your Dualit Espresso Coffee System into a convenient capsule machine. Use this with Dualit NX coffee and tea capsules. Also, purchase the Dualit Piercer so you are able to use Nespresso capsules.

Filter holder - ground / pod - Dualit 84460 you can use the 1 cup, 2 cup or ese pod filter baskets with this filter holder to make espresso coffee with the Dualit 84460 3 in 1 espresso machine.

Filter papers/250 pack/for Dualit espresso 84460.

Group Gasket fits the Cafe Minuetto 1334/1 and 1324 Dualit 84460 3 in 1 and 4 in 1.

Milk frother insert for Dualit 84175.

This is the pod filter basket for the Cafe Minuetto, model 1334/Dualit 84460 espresso/Espressione CE4492. This enables you to use E.S.E. pods.

Espressione 2 cup filter basket, Cafe Minuetto/Dualit 84460 espresso. Model 1334/1/Espressione CE4492.

Dualit timer for mini oven models 89220 and 89100. Please note that this timer is an exact replacement for the model 89220. You can use it on model 89100. However, this style does not have the permanent "ON" feature as that one did, and this will time down and click off.

This will fit the 4-speed Dualit hand mixer. Note: These will NOT fit the older HMR1US 5-speed mixer, which is not available any longer.

Dualit balloon whisk used on the Dualit hand mixers. HMR1US only.

Dualit dough hooks (set of 2). HMR1US only. Used on the Dualit hand mixers.

Gears for Dualit hand mixer NEW 88520 series DHM3A set of 2 gears. This is for a 4-speed hand mixer only. Email us for instructions on how to replace it.

Wire whisk for Dualit hand mixer DHM3. Fits models DHM3 or DHM3A.

Cord, Dualit Classic toaster Genuine OEM Dualit parts come with push-on connector terminals for 2 hot leads and ground wire 120-volt power cord.

Crumb Tray for the 2 slice Dualit toaster. Comes with the 2 tabs for the tray as shown. Genuine OEM Dualit parts.

Crumb Tray for the 4 slice Dualit toaster. Comes with 2 tabs as shown in photo. Genuine OEM Dualit parts.

Dualit original OEM parts. ProHeat elements for New Gen, Vario, and Combi toasters. To replace elements, use 1/4" box wrench on nut connections. With genuine OEM Dualit parts made to withstand commercial use, ProHeat elements have been designed specifically for the Dualit Vario toaster. The patented design was nominated for a Millennium Award for Innovation. It is the only toaster element available on the market that has a protective layer over the wires, making them virtually unbreakable. ProHeat elements will fit Dualit toasters made in the last 50 years* and are easily replaced if one does fail. Please ensure you fit the correct element type in the correct position. You will receive an email with link to download install instructions. Please download right away as these will expire. Please Note: These elements have mica on the outside covering the element windings. It is NOT plastic, please do not remove. Install with this on. Elements do not matter which way they face. Elements are marked with the Dualit name and marked which element they are used for.

Dualit original OEM parts. Dualit 2 slice toaster complete set of elements that works on New Gen, Vario, and Classic styles. To replace elements, use 1/4" box wrench on nut connections. Genuine OEM Dualit parts. You will get: • 2 End Elements for Dualit Classic - 120 Volt • 1 Center Element for Dualit classic - 120 Volt Note: These are the new-style Dualit elements with mica shield. This is not plastic and should not be removed. Download Instructions below. Replacing proheat elements Instructions

Dualit 2 Slice Chrome Outer Shell Cover. (Note: Photo shown with protective film on it.)

Dualit 2 slice toaster lifter assembly.

Dualit original OEM parts. ProHeat elements for New Gen, Vario, and Combi toasters. To replace elements, use 1/4" box wrench on nut connections. With genuine OEM Dualit parts made to withstand commercial use, ProHeat elements have been designed specifically for the Dualit Vario toaster. The patented design was nominated for a Millennium Award for Innovation. It is the only toaster element available on the market that has a protective layer over the wires, making them virtually unbreakable. ProHeat elements will fit Dualit toasters made in the last 50 years* and are easily replaced if one does fail. Please ensure you fit the correct element type in the correct position. You will receive an email with link to download install instructions. Please download right away as these will expire. Please Note: These elements have mica on the outside covering the element windings. It is NOT plastic, please do not remove. Install with this on. Elements do not matter which way they face. Elements are marked with the Dualit name and marked which element they are used for.

Dualit 3 slice chrome shell cover. (Note: Shown with protective film on it.)

Dualit 4 slice chrome outer shell cover. (Note: Photo shown with protective film on it.)

Dualit 4 slice electronic selector switch. This switch has 6 terminals on one side and 2 on the other. Genuine OEM Dualit parts (this is for the electronic version #49200).

Dualit original OEM parts with ProHeat elements for New Gen, Vario, and Combi toasters. To replace elements, use 1/4" box wrench on nut connections. With genuine OEM Dualit parts made to withstand commercial use, ProHeat elements have been designed specifically for the Dualit Vario toaster. The patented design was nominated for a Millennium Award for Innovation. It is the only toaster element available on the market that has a protective layer over the wires, making them virtually unbreakable. ProHeat elements will fit Dualit toasters made in the last 50 years* and are easily replaced if one does fail. Please ensure you fit the correct element type in the correct position. You will receive an email with link to download install instructions. Please download right away as these will expire. Please Note: These elements have mica on the outside covering the element windings. It is NOT plastic, please do not remove. Install with this on. Elements do not matter which way they face. Elements are marked with the Dualit name and marked which element they are used for.

Dualit original OEM parts with ProHeat elements for New Gen, Vario, and Combi toasters. To replace elements, use 1/4" box wrench on nut connections. With genuine OEM Dualit parts made to withstand commercial use, ProHeat elements have been designed specifically for the Dualit Vario toaster. The patented design was nominated for a Millennium Award for Innovation. It is the only toaster element available on the market that has a protective layer over the wires, making them virtually unbreakable. ProHeat elements will fit Dualit toasters made in the last 50 years* and are easily replaced if one does fail. Please ensure you fit the correct element type in the correct position. You will receive an email with link to download install instructions. Please download right away as these will expire. Please Note: These elements have mica on the outside covering the element windings. It is NOT plastic, please do not remove. Install with this on. Elements do not matter which way they face. Elements are marked with the Dualit name and marked which element they are used for.

Dualit 4 slice toaster lifter assembly.

Dualit original OEM parts. To replace elements, use 1/4" box wrench on nut connections. You will receive: • Genuine OEM Dualit Parts • 2 End Elements for Dualit Classic 120-Volt Toaster • 3 Center Elements for Dualit Classic 120-Volt Toaster Note: These are the new-style Dualit elements with mica shield. This is not plastic and not to be removed. Download Instructions below. Replacing proheat elements Instructions

Dualit Cord Stay Holder for toaster cord.

Dualit Spanner Wrench for removing nuts when replacing elements in the toaster.

Dualit Switch I II for toaster. Genuine OEM Dualit parts.

Dualit Switch II IIII for toaster. Genuine OEM Dualit parts.

Dualit Timer Mi2 (Dualit Original Part). This is the older ROUND version timer Mi2 and will work in Dualit Classic and Vario toasters. It comes with a knob and new wire connectors and screws for the knob. Take a photo of the current wiring and where the connection goes to make it easy when replacing.

This is a Dualit original OEM part (not generic). Use in place of Mi2 and TTi660 timer. This is the Mi7 timer and can be used on all Dualit classic toasters (not the Dualit oven 89100/89220 or Dualit Lite/Studio toasters). The installation is simple as there are only 4 wires to pull off and push on. The timer will come with a new knob and new terminal connectors with piggy pack if you have the 6-wire version and screws to attach the timer to the housing. Dualit Toaster Timer Replacement Instructions: • With the appliance unplugged, remove crumb tray. • Gently pry off the timer knob. Depending on the age of the appliance, this may be a little difficult. If a screwdriver needs to be used, TAKE CAUTION. • Place toaster upside down on a protected surface. • Remove the (4) four feet and (2) two screws securing the bottom plate (all Phillips head). Remove base plate. • Place the toaster upright and remove all (5) five Phillips head screws securing the right-hand (wide) side cover, removing the top screw last. • Place the toaster again on its back and gently separate the cover from the toaster. Connected wires will prevent complete separation. • Remove the (2) two Phillips head screws securing the timer to the cover. • Attach the existing power cord connectors to the top wire lugs. These (2) two lugs are vertical. • The lower left wire lug (which is horizontal) needs to have the blue/blue or blue/black wires plugged there. • The lower right wire lug (which is horizontal) needs to have the red/brown wires connected there. • With the new timer switch installed and wired accordingly, join the side cover to the toaster and, at this time, secure with only (1) one screw. • Place toaster upright (normal position), plug toaster into power outlet and turn timer past (2) two. At this time, the selected toasting slots should be heating up. You may now choose another selection and these too should begin heating. • After timer has stopped, unplug the appliance and let cool. • After toaster has sufficiently cooled, reverse steps 5-1 to reassemble your toaster. Note: There are several types of older timers that were used. Don’t be alarmed if the existing timer doesn’t look like your replacement timer. If you have a timer that has (2) two wires that are from the power cord and are secured by screws, please have a qualified repair specialist perform the replacement. It is going to entail special tools. After removing all wires from the old timer, secure the new timer to the cover with the FLAT side of the timer shaft facing the top of the toaster. If there are any further questions, please don’t hesitate to contact us at (201) 439-1700 or email us at info@electra-craft.com.

Dualit Electronic Control Module. For D4BEHUS + D2BEHUS models ONLY. These ECMs will work on both the 2 + 4 slice toasters and are not model-specific. You will need to reuse your selector knob. It does not come with the selector switch.

Element kit for 3 slice or 2+1 slice Dualit toaster, 120v. You will get 4 elements to install: 2 end and 2 center elements. These are genuine OEM Dualit parts. Install Instructions availabe in below link Replacing proheat elements Instructions

Foot for the hexagonal adjustable for Dualit toasters.

No screw included.

Red Light for the Dualit NEW GEN toaster.

Switch for Dualit 2 slice "electronic" style toaster model/style #29200.

Switch for the Dualit 2 slice NEW GEN-style toaster (1 tab on one side, 3 tabs on the other side).

Switch for the Dualit NEW GEN toaster 4 slice (this will not work on the electronic version #49200).

Tab for Dualit crumb tray (2 tabs).

Timer knob for Dualit toaster fits over the timer shaft for all Dualit timers.

A Bugatti Diva 1 cup filter basket that fits the Bugatti Diva model filter holder.

It is used on all models. This is for the 120-volt version.